Wireless switch unit (inbuilt) – 2 outputs – RFSA-62B

• The switching unit with 2 output channels is used for controlling appliances and light circuits.
• They can be combined with detectors, controllers, iNELS RF Control
or system components.
• The BOX design lets you mount it right in an installation box, a ceiling
or controlled appliance cover.
• It enables connection of switched load 2x 8 A (2x 2 000 W).
• Function: button, impulse relay and time function of delayed start and
return with time setting range of 2 s-60 min.
• It is possible to assign any function to each output relay.
• Each of the channels may be controlled by up to 12/12 channels
(1 channel represents 1 button on the controller).
• The programming button on the unit is also used for manual control
of the output.
• Memory status can be pre-set in the event of a power failure.
• For components it is possible to set the repeater function via the RFAF
/ USB service device.
• Range up to 100 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
).