Wireless contact converter – RFIM-20B, RFIM-40B

• RFIM-20B: the wireless contact converter changes your existing button / switch to a wireless one.
– two inputs enable control of two units independent.
– battery power supply (3 V / CR2477 – included in the supply) with battery life of around 5 years based on frequency of use.
– contact can be permanently closed (does not drain on the battery).
• RFIM-40B: the wireless contact converter changes your existing button to a wireless one.
– four inputs enable control of four units independently.
– battery power supply (2x 3 V / CR2032) with battery life of around
5 years based on frequency of use (included in the supply).
– only impulse control
• It can be used to transmit information on switching on the contact
(detector, button, technology, logic output).
• The BOX design lets you mount it right in an installation box under the
button or switch.
• When pressing the button, it sends a set signal (ON/OFF, dimming,
time switching OFF / ON, blinds up/down).
• Sending a command is indicated by a red LED.
• Option of setting light scenes, where with a single press, you can control multiple units of iNELS RF Control.
• Range up to 200 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control