Universal dimmer – RFDEL-71B

• The universal built-in dimmer is used to regulate light sources:
R – classic lamps
L – halogen lamps with wound transformer
C – halogen lamps with electronic transformer
ESL – dimmable energy-efficient fluorescent lamps
LED – LED light sources (230 V).
• They can be combined with detectors, controllers, iNELS RF Control or
system components.
• The BOX design lets you mount it right in an installation box, a ceiling
or light cover.
• 6 light functions – smooth increase or decrease with time setting
2 s-30 min.
• When switched off , the set level is stored in the memory, and when
switched back on, it returns to the most recently set value.
• Thanks to setting the min. brightness by potentiometer, you will eliminate fl ashing of the LED and ESL light sources.
• The universal dimmer may be controlled by up to 25 channels (1 channel represents 1 button on the controller).
• Connection of the existing button on the control input „S“ enables
combination of wireless control with classic (wired) control.
• The programming button on the controller is also used for manual
control of the output.
• Memory status can be pre-set in the event of a power failure.
• For components it is possible to set the repeater function via the RFAF
/ USB service device.
• Range up to 160 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
).