Switching socket (single/multi-function) – RFSC-61

• The switched socket with 1 output channel is used to control fans,
lamps, heaters and appliances, which are connected by a power cord.
• They can be combined with detectors, controllers, iNELS RF Control or
system components.
• Thanks to the socket design, installation is simple by direct insertion
into the existing socket.
• It enables connection of the switched load up to 16 A (4 000 W).
• Multi-function design – button, impulse relay and time function of delayed ON or OFF with time setting of 2s-60 min.
• The switched socket may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
• The programming button on the socket is also used for manual control of the output.
• Memory status can be pre-set in the event of a power failure.
• Range up to 200 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
).