• SA3-04M is a switching actuator containing 4 independent relays with
changeover potentialless contacts.
• Maximum load per contact is 16 A/4000 VA/AC1.
• Each of the four output contacts are individually controllable and
addressable.
• All four relays are individually decorated input terminals, and therefore can switch various independent potentials.
• The actuator is designed for switching to four various appliances and
loads relay output (potential free contact).
• Thanks to changeover contacts, it can be used to control up to two
drives 230 V power (such as blinds, shutters or awnings) with appropriate bridging, the contacts can secure hardware blocking the possibility of simultaneous switching of the phase on both outputs, see
example of connection.
• LEDs on the front panel signal the status of each output.
• Contact status of each relay can be changed separately and manually
by control buttons on a front panel.
• Switching actuators SA3 is normally supplied in the option AgSnO2
contact material.
• SA3-04M in 3-MODULE version is designed for mounting into
a switchboard, on DIN rail EN60715.
Switching actuator 6channel SA3-06M
- FOR SWITCHING HOME APPLIANCES, E.G. LIGHTING AND THERMO DRIVERS
- SA3-06M IS A SWITCHING ACTUATOR CONTAINS 6 INDEPENDENT RELAYS WITH CHANGEOVER POTENTIALLESS CONTACTS.
- MAXIMUM LOAD PER CONTACT IS 8 A/2000 VA/AC1.
- EACH OF SIX OUTPUT CONTACTS ARE INDIVIDUALLY CONTROLLABLE AND ADDRESSABLE.
- THE RELAYS ARE DIVIDED INTO TWO GROUPS, THE GROUP OF FOUR RELAYS ON THE BOTTOM TERMINAL SWITCHES THE COMMON POTENTIAL, A PAIR OF RELAYS ON TOP OF THE TERMINAL SWITCHES SECOND COMMON POTENTIAL.
- ALL RELAYS ARE EQUIPPED WITH CHANGEOVER CONTACTS, BUT GIVEN THE COMMON SUPPLY TERMINALS, FOUR OR A PAIR OF RELAY, HARDWARE DOES NOT BLOCK THE ABILITY OF THE CURRENT PHASE SWITCHING ON BOTH OUTPUTS CONTROLLING THE DRIVE 230 V (BLINDS, SHUTTERS). BUT THE ACTUATOR CAN CONTROL THESE DRIVES USED ON THE PREPARED SOFTWARE BLOCKING IN IDM.
- THE ACTUATOR IS SUITABLE FOR OPERATING DISCONTINUOUSLY CONTROLLED THERMO DRIVES IN THE DISTRIBUTOR UNDERFLOOR HEATING.
- LEDS ON THE FRONT PANEL SIGNAL THE STATUS OF EACH OUTPUT.
- CONTACT STATUS OF EACH RELAY CAN BE CHANGED SEPARATELY AND MANUALLY BY CONTROL BUTTONS ON A FRONT PANEL.
- SA3 IS NORMALLY SUPPLIED IN THE OPTION AGSNO2 CONTACT MATERIAL, IT CAN BE SUPPLIED WITH CONTACT AGNI BY REQUEST.
- SA3-06M IN 3-MODULE VERSION IS DESIGNED FOR MOUNTING INTO A SWITCHBOARD/DIN RAIL EN60715.
Reviews
There are no reviews yet.