Switch unit for shutters – RFJA-32B

• The switching unit for blinds has 2 output channels used to control
garage doors, gates, blinds, awnings, etc.
• It can be combined with Control or System units iNELS RF Control.
• The BOX design lets you mount it right in an installation box, a ceiling
or motor drive cover.
• RFJA-12B/230V (120V): connection of switched load 2x 8 A (2x 2 000 W).
• RFJA-12B/24VDC: contactless quiet switching.
• RFJA-32B/230V (120V): connection of switched load 2x 8 A (2x 2 000 W),
with the ability to connect existing buttons.
• RFJA-32B/24VDC: contactless quiet switching with the ability to connect existing buttons.
• Short presses of the controller enable tilting of lamellas, and a long
press enables you to draw the blinds up or down to the end position.
• Each of the units may be controlled by up to 25 channels (1 channel
represents one assigned controller).
• The programming button on the unit is also used for manual control
of the output.
• For components it is possible to set the repeater function via the RFAF
/ USB service device.
• Range up to 100 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
).