Switch unit for shutters – RFJA-12B

• RFSA-61M: the switching unit with 1 output channel is used for controlling appliances, sockets or lights.
– the one-module design of the unit into a switchboard enables connection of a switched load up to 16 A (4 000 W).
– the switching unit may be controlled by up to 25 channels (1 channel
represents 1 button on the controller).
• RFSA-66M: the switching unit with 6 output channels is used for independent control of up to 6 appliances, sockets or lights. It is possible
to assign any function to each output relay.
– the three-module design of the unit into a switchboard enables connection of a switched load 6x 8 A (6x 2000 W).
– it is just right for creating scenes, where with one push of the controller, you can switch on or off all 6 channels simultaneously.
– each of the channels may be controlled by up to 25 channels (1 channel represents one button on the controller).
• They can be combined with detectors, controllers, iNELS RF Control or
system components.
• The integrated switching contact enables connection, where the controlled appliance may be switched on or off by command.
• Function: button, impulse relay and time function of delayed start or
return with time setting range of 2 s-60 min.
• The programming button on the unit is also used for manual control
of the output.
• The package includes an internal antenna AN-I, in case of locating the
element in a metal switchboard, you can use the external antenna
AN-E for better signal reception.
• Memory status can be pre-set in the event of a power failure.
• For components it is possible to set the repeater function via the RFAF
/ USB service device.
• Range up to 200 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
)