• The switching unit with 1 output channel is used for controlling appliances, sockets or lights.
• They can be combined with detectors, controllers, iNELS RF Control or
system components.
• The increased IP 65 protection is suited to mounting on the wall or in
harsh environments such as the cellar, garage or bathrooms.
• It enables connection of the switched load up to 12 A (3.000 W).
• Multi-function design – button, impulse relay and time function of delayed ON or OFF with time setting of 2 s-60 min.
• The switching unit may be controlled by up to 25 channels (1 channel
represents 1 button on the controller).
• The programming button on the unit is also used for manual control
of the output.
• Memory status can be pre-set in the event of a power failure.
• For components it is possible to set the repeater function via the RFAF
/ USB service device.
• Range up to 200 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
).
Switch unit for outdoor use (single/multi-function) – RFUS-61
- SWITCH UNIT WITH ENHANCED IP 65 PROTECTION ARE DESIGNED FOR USE IN HARSH ENVIRONMENTS: DUSTY, DIRTY ENVIRONMENTS, OUTDOORS, CELLARS, GREENHOUSES, BOILER ROOMS, RESERVOIRS AND TANKS, REFRIGERATION BOXES, ETC.
- SWITCHING UNIT WITH 1 OUTPUT CHANNEL IS USED TO CONTROL HOME APPLIANCES, SOCKETS, LIGHTS.
- MULTIFUNCTIONAL – BUTTON SWITCH ON/OFF , IMPULSE RELAYS, DELAYED RETURN, DELAYED START WITH THE RANGE FROM 2 S TILL 60 MIN.
- SWITCHING UNIT CAN BE CONTROLLED BY UP TO 25 CHANNELS (1 CHANNEL REPRESENTS ONE BUTTON ON THE CONTROLLER).
- IT CAN BE COMBINED WITH CONTROLLERS AND SYSTEM UNITS OF INELS RF CONTROL.
Reviews
There are no reviews yet.