Multifunctional GSM communicator – RFGSM-220M

• The multi-function GSM communicator is used for remote switching of
heating, lights, gate, garage door, etc.
• GSM communicator can be used in several ways, which can be
combined:
a) control by telephone, where a sent SMS or ringing through once
switches an internal relay.
b) reacts to 1 of 4 potential free wired inputs (detectors, switches),
where it is possible to set a consequent reaction.
c) off ers the option of ascertaining the status of units iNELS RF Control
(ON/OFF, temperature).
d) control by telephone, where a sent SMS or ringing through once
transmits an RF command to the switching unit within range, which
then switches something (e.g. heating).
e) security function (switching on the ALARM) in combination with
wireless detectors, where activation / deactivation takes place by
ringing through once or by key alarm.
• The three-module design of the unit into a switchboard enables connection of a switched load 2x 8 A (2x 2000 W).
• Settings are performed by SW Connect 1 via mini USB connector
• Li-Ion battery for 30 minute function backup
• The GSM communicator is powered by an adapter in the range 11-30 V DC.
• The package includes an internal antenna AN-I, in case of locating the
communicator in a metal switchboard, you can use the external antenna AN-E for better signal reception.
• Range up to 150 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
).
• Package includes: 2x internal antenna AN-I, mini USB connector, SW
Connect 1, adapter 12 V 6 W.