Glass wall card reader GMR3-61

• Wall RFID card reader GMR3-61 is designed for reading of contactless
media (chip cards, key fobs, tags, etc.), which are used for controlling
access to buildings or parts of buildings.
• With the glass controller GMR3-61 users will appreciate the elegant
design and the easy of control using six touch buttons, which can
be assigned diff erent control functions lighting, shading, scenes,
heating, etc.
• GMR3-61 a design element of the (control) system iNELS and is available in black (GMR3-61/B) and white (GMR3-61/W) variants.
• GMR3-61 reader can be used to control the security system (locking /
unlocking) access system (opening doors, gates, etc.) or appliances
(based on assigned rights).
• GMR3-61 supports RFID media with the carrier frequency of
13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K (EV1),
DESFire 4K (EV1) .
• The GMR3-61 is also equipped with 8A relay output with changeover
contact AgSnO2
, which can be switched directly by reader (or by any
controller in the system).
• Between each pair of touch keys is a pair of indicator LEDs (Green, Red)
to indicate the status of the controlled appliance, or the state of any
sensor or actuator in the system.
• Located on each touch button is a blue LED indicator, signalling the
touch of a button. Touching may also be signalled by a vibrating pulse
or audible tone – optionally in the software iDM3.
• All variants of GMR3-61 are available in sizes of luxury controllers
LOGUS90 (94 x 94 mm).
• GMR3-61 reader is equipped with a sensor of ambient light intensity.
Based on information from the sensor can switch the orientation of
blue LEDs on the touch-pad GSB3 or perform various actions with the
software iDM3, eg. To control the lighting circuits in the corridor and
others.
• GMR3-61 cannot be installed into multiple frames they are designed
for mounting into installation boxes