Dimming socket (single/multi-function) – RFDSC-71

• The dimmed socket is used to control light sources that are connected
by power cord – especially lamps:
R – classic lamps
L – halogen lamps with wound transformer
C – halogen lamps with electronic transformer
ESL – dimmable energy-effi cient fl uorescent lamps
LED – LED light sources (230 V).
• They can be combined with detectors, controllers, iNELS RF Control or
system components.
• Thanks to the socket design, installation is simple by direct insertion
into the existing socket.
• Output load 300 W.
• Multi-function 6 light functions – smooth increase or decrease with
time setting 2 s-30 min.
• When switched off , the set level is stored in the memory, and when
switched back on, it returns to the most recently set value.
• Thanks to setting the min. brightness by potentiometer, you will eliminate fl ashing of the LED and ESL light sources.
• The universal dimmer may be controlled by up to 32 channels
(1 channel represents 1 button on the controller).
• The programming button on the socket is also used for manual control
of the output.
• Memory status can be pre-set in the event of a power failure.
• Range up to 160 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
).
• Produced in 5 designs of sockets and plugs: