Dimming actuator DA3-06M

  • HIS PRODUCT WILL BE AVAILABLE 1.Q 2019
  • DA3-06M IS A UNIVERSAL DIMMER SIX-CHANNEL ACTUATOR TO CONTROL THE BRIGHTNESS OF DIMMABLE ESL, LED AND RLC LIGHT SOURCES WITH 230V SUPPLY.
  • MAXIMUM POSSIBLE LOAD IS 150 VA FOR EACH CHANNEL.
  • EACH OUTPUT CHANNEL IS INDIVIDUALLY CONTROLLABLE AND ADDRESSABLE.
  • THE TYPE OF LIGHT SOURCE IS SET BY THE SWITCH ON THE FRONT OF THE INSTRUMENT.
  • SETTING THE MIN. BRIGHTNESS POTENTIOMETER ON THE FRONT OF THE DEVICE ELIMINATES THE FLICKER OF VARIOUS TYPES OF LIGHT SOURCES.
  • YOU CAN MANUALLY CONTROL THE OUTPUT BY USING THE FRONT PANEL CONTROL BUTTONS.
  • THE ACTUATOR IS EQUIPPED WITH AN ELECTRONIC OVERCURRENT AND THERMAL PROTECTION THAT SHUTS OFF THE OUTPUT DURING OVERLOAD, SHORT CIRCUIT, OVERHEATING.
  • DURING INSTALLATION, LEAVE AT LEAST HALF OF THE FREE SPACE ON EACH SIDE OF THE ACTUATOR FOR BETTER COOLING.

• DA3-06M is a universal six-channel dimmer actuator that controls the
brightness of dimmable ESL, LED and RLC light sources with 230V power.
• The DA3-06M has 6 semiconductor controlled 230 V AC outputs. Maximum possible load is 150 VA for each channel.
• Each of the output channels is individually controllable.
• Setting min. Brightness with the potentiometer on the front of the instrument eliminates fl ickering of diff erent types of light sources.
• Using the front panel control buttons, you can manually control the
output.
• The actuator is equipped with electronic overcurrent and thermal
protection that shuts off the output during overloads, short circuits or
overheating.
• When installing, on each side of the actuator, it is necessary to leave at
least half a module space for better cooling.
• DA3-06M in 6-MODULE version is designed for mounting into
a switchboard/ DIN rail EN60715.

Reviews

There are no reviews yet.

Be the first to review “Dimming actuator DA3-06M”

Your email address will not be published. Required fields are marked *

Shopping Cart