• LBC3-02M is an analog two-channel actuator designed to control dimmable ballasts of fl uorescent lamps or other light sources controlled
by signal 0(1) – 10 V DC.
• In the iDM3, it is possible to set the output mode 0(1) – 10 V DC.
• During analog voltage output (0)1-10 V DC control, relay contact automatically switches power supply to light ballast (0% = relay OFF,
1-100% = relay ON)
• LBC3-02M contains 2 independent analog voltage outputs (0)1-10 V
DC and their dependents 2 relays with potential-free contact.
• Maximum contacts load 16 A/4000 VA/AC1.
• Each of two channels is separately controllable and addressable.
• LEDs on front panel signals status of each channel.
• With control buttons on the front panel, it is possible to change the
status of each channel separately.
• LBC3-02M in 3-MODULE version is designed for mounting into
a switchboard/ DIN rail EN60715
Dimming actuator 2-channel LBC3-02M
- FOR CONTROLLING DIMMING BALLASTS 1-10 V
- LBC3-02M IS A DIMMING ANALOG TWO-CHANNEL ACTUATOR DESIGNED FOR CONTROL OF DIMMING LIGHT BALLASTS WITH SIGNAL 1-10V.
- DURING ANALOG VOLTAGE OUTPUT 1-10V CONTROL, RELAY CONTACT AUTOMATICALLY SWITCHES POWER SUPPLY TO LIGHT BALLAST (0%=RELAY OFF, 1-100%=RELAY ON)
- LBC3-02M CONTAINS 2 INDEPENDENT ANALOG VOLTAGE OUTPUTS 1-10V AND THEIR DEPENDENTS 2 RELAYS WITH POTENTIAL-FREE CONTACT.
- MAXIMUM CONTACTS LOAD 16 A/4000 VA/AC1.
- EACH OF TWO-CHANNELS IS SEPARATELY CONTROLLABLE AND ADDRESSABLE.
- LED‘S ON FRONT PANEL SIGNALS STATUS OF EACH CHANNEL.
- WITH CONTROL BUTTONS ON THE FRONT PANEL, IS POSSIBLE TO CHANGE THESTATUS OF EACH CHANNEL SEPARATELY.
- LBC3-02M IN 3-MODULE VERSION IS DESIGNED FOR MOUNTING INTO A SWITCHBOARD/ DIN RAIL EN60715.
Reviews
There are no reviews yet.