Dimmer for coloured (RGB) LED strips – RFDA-73M/RGB

  • THE LED STRIPE DIMMER SERVES FOR INDEPENDENT CONTROL OF 3 MONOCHROME LED STRIPS OR ONE RGB LED STRIP.
  • THANKS TO THE EXTENDED OPTION OF CONTROLLING MODES IT IS POSSIBLE TO COMBINE WITH:
    A)    CONTROL AND SYSTEM UNITS OF INELS RF CONTROL.
    B)    CONTROL SIGNAL 0(1)-10 V.
    C)    CONNECTION TO INELS BUS USING DAC CONVERTER.
  • 6 LIGHTING FUNCTIONS – CONTINUOUS START OR RETURN WITH TIME SETTING RANGE OF 2S-30MIN.
  • ALLOWS DIMMING THE LOAD:
    A)    MONOCHROME LED STRIP 7,2W (ELKO LIGHTING) – 3 X 8 M
    B)    RGB LED STRIP 14,4W (ELKO LIGHTING) – 10 M
  • UPON SWITCHING OFF, THE SET LEVEL IS STORED IN THE MEMORY, AND WHEN SWITCHED BACK ON, IT RETURNS TO THE MOST RECENTLY SET VALUE.
  • DIMMER CAN BE CONTROLLED BY UP TO 25 CHANNELS (1 CHANNEL REPRESENTS ONE BUTTON ON THE CONTROLLER).
  • IN THE CASE OF PLACEMENT IN THE METAL SWITCHBOARD, WE RECOMMEND YOU TO USE AN EXTERNAL ANTENNA AN-E TO IMPROVE SIGNAL TRANSMISSION.

• The dimmer for LED strips is used for independent control of 3 singlecolor LED strips or one RGB LED strip.
• The expanded selection of control modes enables it to be combined with:
a) Detectors, Controllers and System units iNELS RF Control
b) control signal 0(1)-10 V
c) connecting to iNELS BUS using DAC converters.
• The unit‘s three-module design with switchboard mounting enables
connection of dimmed load 3x 5 A, which represents:
a) single-color LED strip 7.2 W (ELKO Lighting) – 3x 8 m
b) RGB LED strip 14.2 W (ELKO Lighting) – 10 m.
• 6 light functions – smooth increase or decrease with time setting 2 s-30 min.
• When switched off , the set level is stored in the memory, and when
switched back on, it returns to the most recently set value.
• The dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
• The power supply of the unit is in the range of 12-24 V DC, and is indicated by a green LED.
• The package includes an internal antenna AN-I , in case of locating the
unit in a metal switchboard, you can use the external antenna AN-E for
better signal reception.
• Memory status can be pre-set in the event of a power failure.
• For components it is possible to set the repeater function via the RFAF
/ USB service device.
• Range up to 160 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
).

Reviews

There are no reviews yet.

Be the first to review “Dimmer for coloured (RGB) LED strips – RFDA-73M/RGB”

Your email address will not be published. Required fields are marked *

Shopping Cart