Dimmer for coloured (RGB) LED strips – RFDA-73M/RGB

• The dimmer for LED strips is used for independent control of 3 singlecolor LED strips or one RGB LED strip.
• The expanded selection of control modes enables it to be combined with:
a) Detectors, Controllers and System units iNELS RF Control
b) control signal 0(1)-10 V
c) connecting to iNELS BUS using DAC converters.
• The unit‘s three-module design with switchboard mounting enables
connection of dimmed load 3x 5 A, which represents:
a) single-color LED strip 7.2 W (ELKO Lighting) – 3x 8 m
b) RGB LED strip 14.2 W (ELKO Lighting) – 10 m.
• 6 light functions – smooth increase or decrease with time setting 2 s-30 min.
• When switched off , the set level is stored in the memory, and when
switched back on, it returns to the most recently set value.
• The dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
• The power supply of the unit is in the range of 12-24 V DC, and is indicated by a green LED.
• The package includes an internal antenna AN-I , in case of locating the
unit in a metal switchboard, you can use the external antenna AN-E for
better signal reception.
• Memory status can be pre-set in the event of a power failure.
• For components it is possible to set the repeater function via the RFAF
/ USB service device.
• Range up to 160 m (in open space), if the signal is insuffi cient between
the controller and unit, use the signal repeater RFRP-20 or protocol
component RFIO2
that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2
(RFIO2
)