DALI motion detector DMD3-1

  • IT SERVES FOR DETECT THE MOVEMENT OF PEOPLE WITH INTEGRATED SENSOR ILLUMINATION
  • USED TO DETECT PEOPLE MOVING IN AN AREA.
  • FOR DETECTION IT UTILIZES INFRARED SPECTRUM SENSING AND INCLUDES AN INTEGRATED SENSOR FOR CONTROLLING LIGHT INTENSITY OF ARTIFICIAL LIGHT BASED ON THE CONTRIBUTION OF NATURAL LIGHT.
  • SETTING THE BUS COMMUNICATION IS PERFORMED BY HOLDING THE BUTTON (FOR LONGER THAN EIGHT SEC.) ON THE BACK OF THE DETECTOR.

EQUIPPED WITH TWO COMMUNICATION / POWER INTERFACES:

  • DALI – DIGITAL ADDRESSABLE LIGHTING INTERFACE.
  • BUS – INSTALLATION INELS BUS SYSTEM.

CONFIGURED BY THE INELS3 DESIGNER & MANAGER SYSTEM, WITH WHICH, AMONGST THE FOLLOWING ARE ALSO POSSIBLE:

  • SET UP INDIVIDUAL SWITCH LIGHTING USING DALI ADDRESSES.
  • SET THE TEMPERATURE RANGE TO ELIMINATE UNDESIRABLE EFFECTS CAUSED BY SWITCHING TECHNOLOGY.
  • OR OTHER INFLUENCES IN THE AREA.
  • ENABLE / DISABLE THE LED ALARM ON THE DETECTOR HOUSING.

THE DETECTOR IS DESIGNED FOR CEILING MOUNTING AND FREQUENTLY USE IN OFFICES, CORRIDORS, STAIRWAYS AND HOUSES.

Categories: , , ,

• DMD3-1 is a combined detector for ceiling mounting.
• Possibilities to use the DMD3-1:
– Motion detector
– Sensor luminescence
– Temperature measuring
– Humidity measurement
• The unit is equipped with two communication interfaces:
– Installation iNELS BUS
– DALI
• The motion detector is used to detect people moving in the area. Using
the passive scanning infrared spectrum for detection.
• Integrated luminescence sensor can be used for sensing current luminescence at the point of installation of the unit. This information can be
used in tasks to maintain a constant luminescence. In space where it is
possible, thanks to the contribution of natural light from the outside to
adjust the artifi cial light, which can reduce energy consumption.
• Setting the communication interface is done using the SET button.
• The unit can be confi gured via the iNELS3 Designer & Manager software, which, among other things it is possible to:
– Set the desired function depending on detected motion.
– Resolve jobs based on the value of luminescence.
– Enable / disable the alarm LED on the detector housing.
• DMD3-1 detector is designed for indoor installation and is not intended
for outdoor use.
• DMD3-1 detector is powered directly via the iNELS BUS installation
(nominal 27 V DC) or DALI BUS (nominal 16 V DC).

Reviews

There are no reviews yet.

Be the first to review “DALI motion detector DMD3-1”

Your email address will not be published. Required fields are marked *

Related products

Shopping Cart