Central unit CU3-01M

  • BRAIN OF INELS SYSTEM
  • T‘S POSSIBLE TO DIRECTLY CONNECT UP TO 2 LINES OF BUS IN TO CU3-01M AND CU3-02M, AND ON EACH BUS WE CAN CONNECT UP TO 32 INELS3 UNITS.
  • THE MAIN DIFFERENCE BETWEEN CU3-02M AND CU3-01M IS THAT CU3-02M IS MOREOVER EQUIPPED BY RF MODULE WHICH ENABLES COMMUNICATION WITH SELECTED UNITS FROM INELS RF CONTROL SYSTEM.
  • USER´S PROJECT AND RETENTIVE DATA ARE STORED IN A NON-VOLATILE INTERNAL MEMORY HEREBY DATA ARE BACKED UP WITHOUT THE SUPPLY VOLTAGE. REAL TIME CLOCK (RTC) BACKUP FOR 10 DAYS. POWER SUPPLY CONTROLLING SYSTEM – NETWORK VOLTAGE AND THE STATUS OF THE BACKUP BATTERY.
  • POSSIBILITY OF SETTING TIME SYNCHRONIZATION VIA NTP SERVER.
  • THE RJ45 ETHERNET PORT‘S CONNECTOR IS LOCATED ON THE FRONT PANEL OF THE UNIT, THE TRANSMISSIONSPEED IS 100 MBPS.
  • FOR CU3-01M (02M) IT IS POSSIBLE TO USE 4 POTENTIAL-FREE INPUTS FOR CONNECTING EXTERNAL CONTROLLERS (BUTTONS, SWITCHES, SENSORS, DETECTORS, ETC.) AND 2 ANALOG INPUTS 0-30V.
  • CU3-01M (02M) COMES WITH OLED DISPLAY THAT SHOWS THE CURRENT STATUS AND CONFIGURATION OF CU3-01M (02M) CENTRAL UNIT.
  • CU3-01M (02M) CAN BE CONTROLLED USING THE DIRECTIONAL BUTTONS ON THE FRONT PANEL. CU3-01M (02M) IN 6-MODULE ARE DESIGNED FOR MOUNTING INTO A SWITCHBOARD ON THE EN60715 DIN RAIL

• CU3-01M and CU3-02M are central units’ of the iNELS system and mediators, between user software interface and controllers, units and
actuators connected to the BUS.
• It‘s possible to directly connect up to 2 lines of BUSes in to CU3-01M
and CU3-02M, and on each BUS we can connect up to 32 iNELS3 units.
• The main diff erence between CU3-02M and CU3-01M is that CU3-02M
is moreover equipped by RF module which enables communication
with selected units from iNELS RF Control system.
• User´s project and retentive data are stored in a non-volatile internal
memory hereby data are backed up without the supply voltage. Real
time clock (RTC) backup for 10 days.
• Power supply controlling system – network voltage and the status of
the backup battery.
• Possibility of setting time synchronization via NTP server.
• The RJ45 Ethernet port‘s connector is located on the front panel of the
unit, the transmission speed is 100 Mbps.
• For CU3-01M (02M) it is possible to use 4 potential-free inputs for connecting external controllers (buttons, switches, sensors, detectors,
etc.) and 2 analog inputs 0 – 30V.
• CU3-01M (02M) comes with OLED display that shows the current status
and enables settings (network settings, date, time, service) of the central unit CU3-01M (02M).
• Movement in the menu CU3-01M (02M) using arrows on the front
panel.
• CU3-01M (02M) in 6-MODULE are designed for mounting into a switchboard on the EN60715 DIN rail

Reviews

There are no reviews yet.

Be the first to review “Central unit CU3-01M”

Your email address will not be published. Required fields are marked *

Shopping Cart