Card reader GCR3-11

  • GLASS RFID CARD READER GCR3-11 IS PART OF A COMPREHENSIVE RANGE OF GLASS INELS CONTROL UNITS
  • GLASS RFID CARD READER GCR3-11 IS PART OF A COMPREHENSIVE RANGE OF GLASS INELS CONTROL UNITS AND CAN BE ADVANTAGEOUSLY USED IN ALL PROJECTS, E.G. GUEST ROOM MANAGEMENT SYSTEM (GRMS).
  • GCR3-11 CARD READER IS DESIGNED FOR READING SMART CARDS, WHICH ARE INTENDED TO ENTER THE HOTEL ROOM OR ANY OTHER PART OF THE BUILDING.
  • INDIVIDUAL SYMBOLS CAN BE ILLUMINATED IN ONE OF THREE COLOURS – RED, GREEN AND BLUE.

• Glass RFID card reader GCR3-11 is part of a comprehensive range of
glass iNELS control units and can be advantageously used in all projects, e.g. guest room management system (GRMS).
• GCR3-11 card reader is designed for reading smart cards, which are
intended to enter the hotel room or any other part of the building.
• GCR3-11 supports RFID media with a carrier frequency of 13.56 MHz.
Supported card types MIFARE Ultralight, DESFire 2K (EV1), DESFire 4K
(EV1).
• The GCR3-11 is a design component of the iNELS system and is available in elegant black (GCR3-11/B) and white (GCR3-11/ W) variants.
• Input card reader is the first device of guest room management system (GRMS), with which the hotel guest comes into contact first and
therefore was designed with an emphasis on representative design.
• Printing is possible to customize to the investor requirements. The
room number as well as the logo of the hotel can be also printed on
each component.
• The controller is also equipped with touch button with function of
bell and with two icons to indicate the status of guest requests, e.g.
“Do Not Disturb” and “Make Up Room”, whose state guest can set from
multi-function touch panel EHT3, glass card holder GCH3-31, glass
switch buttons GSB3-20/S, GSB3-40/S, GSB3-60/S or such GSP3-100
glass switch panel.
• Individual symbols can be illuminated in one of seven colours – red,
green, blue, yellow, pink, turquoise and white.
• Reader GCR3-11 is equipped with an 8A relay output with AgSnO2
contact for door lock control.
• Reader GCR3-11 is equipped with a sensor for ambient light intensity.
Based on information from the sensor it can e.g. switch the lighting
circuits in the corridor.
• All versions are in the size of the module (94×94 mm) from the line
of luxury switches and sockets LOGUS90 and are therefore fully in line
with the design of frames for the sockets of this series, where you can
just as for the controllers choose white and black glass frames.
• GCR3-11 are designed for mounting into an installation box.

Reviews

There are no reviews yet.

Be the first to review “Card reader GCR3-11”

Your email address will not be published. Required fields are marked *

Shopping Cart